How To Make A Makeup Beard

Download Article

Download Commodity

Whether it is for dress-upward, a cosplay, or a play, knowing how to make a fake beard can come in handy. Depending on the materials you use, you can create a unproblematic, false beard perfect for dressing upward, to a more realistic beard better suited for cosplay and theatre. Once yous know how to brand a basic beard, y'all can use similar techniques to create other pieces, such equally a mustache!

1. one

   Cut a three by 4-inch (7.six to ten-cm) piece out of felt for the base of your beard. The exact shape does not matter, simply an oval or trapezoid will piece of work the best. You will exist attaching the wool roving to this, and so choose a color that matches your wool.

   • For example, if your wool roving is cream-colored, use white or off-white felt.
   • You lot tin can use this method for shorter beards, but it works the best on longer, gnome-similar beards.

2. ii

   Cut an almond-shaped hole in the felt for your mouth. Place the felt piece confronting your face, and feel where your mouth is. If yous need to, draw on the felt with a pen. Pull the felt abroad, and so cutting an almond-shaped hole out of it. It should be big enough for your lips to fit through.

   • Trim the height corners of the shape off so that they follow the curve of your mouth and cheeks improve.

   Ad

3. three

   Pull your wool roving into your desired length. Get some wool roving and unravel it to make a rope. Pull information technology apart widthwise into thinner ropes, then pull it into 6 to ten-inch (15 to 25-cm) lengths. Make sure that ropes are all equal length.

   • Do non cut the wool roving, or you will get precipitous ends that won't look natural.
   • You tin can find wool roving in craft stores, material stores, and yarn shops. Yous can also find it online.
   • Wool roving is only wool that has non been twisted into yarn withal.

4. four

   Place a sparse weft of roving confronting the bottom of the rima oris opening. Gather a 1-inch (2.5-cm) wide slice of wool roving, and place the terminal ¹⁄_ii inch (1.3 cm) nether the almond mouth opening. Make certain that the longer part of the wool is pointing upwards and so that information technology covers the mouth and the last ¹⁄_ii inch (1.iii cm) is pointing down.

   • Repeat this step i to 2 more times until the entire bottom border of the rima oris is covered.
   • Yous will be flipping the longer role of the wool downwardly later on you sew it. This will hide the seam.

5. 5

   Sew or gum the wool roving downward. Thread your sewing auto with a thread colour that matches the wool. Set it to a straight run up and a brusque sew length. Begin sewing at the bottom-left corner of the mouth and end sewing at the bottom-right corner.

   • Backstitch when you beginning and stop sewing to prevent the thread from unraveling.
   • Sew together as close equally possible to the lesser edge of the oral fissure. Practice not stitch across the top border.
   • You can use hot glue, tacky glue, or fabric glue for this stride if you don't know how to sew.

6. 6

   Flip the wool roving so that information technology hangs downwards and covers the oral fissure opening. In one case you have finished sewing, cut off any loose or hanging threads. Have the longer part of the wool roving that is covering the mouth, and pull it downward and then that you can see the mouth it over again. This should hide the 1/2-inch (one.three-cm) function of the wool roving that you sewed downwardly.

   • If you used glue, wait for the glue to dry out showtime. Hot glue sets quickly, only textile glue will have 15 to xx minutes. Tacky glue may have several hours.

7. 7

   Tie a slice of string around a length of roving for the mustache. Pull off a length of wool roving for the mustache--information technology tin exist as long as you want it to be. Cut a piece of thread the same color every bit the roving, then wrap information technology a few times around the centre of the wool roving. Tie the thread into a tight knot.

   • This will cause the mustache to sure-fire in the eye and poof out; information technology volition expect more than realistic.

8. 8

   Glue the mustache to the superlative of the felt piece. Outline the top border of the oral fissure with hot glue, fabric glue, or tacky glue, then press the roving into the glue. Make sure that the part you tied is centered. At this indicate, you lot can also glue downwards the balance of the beard.

9. ix

   Secure a thin elastic to each side of the felt piece. Hold the beard against your face, then measure around the dorsum of your head, from ane side of the felt to the other. Cutting a thin piece of elastic according to this measurement. Tie a knot in each end, then staple the knots to each side of the felt.

   • Alternatively, thread the elastic through a yarn or tapestry needle, so poke information technology through the felt. Slip the needle off, then tie a knot in the elastic.

Advertisement

1. 1

   Trace a beard shape on the back of a slice of faux fur. Accept a piece of imitation fur and flip it over so that the dorsum (fabric) side is facing you. Draw a beard shape on the fabric with a marker, including the rima oris hole.^[1]

   • You lot can besides use felt instead.^[2]
   • Your bristles can be whatsoever colour your want, but white, dark-brown, black, gray, or orangish will look more natural.

2. 2

   Cut the beard with a craft blade or scissors. Brand sure that you cut from the back of the cloth. Slide your scissors through the fur then that yous don't cut the fibers. You simply desire to cut the cloth role of the fur, not the fur office. Be sure to cutting the oral cavity hole out likewise.^[3]

   • The oral fissure hole needs to be big enough to expose your lips.
   • If you are making a felt beard, apply scissors instead.^[iv]

3. 3

   Add an 8-inch (20-cm) elastic to each side of the beard. Cut an eight-inch (20-cm) long piece of elastic. Fold it in half to brand a loop, then sew it to the top-left corner of the beard. Make certain that the bristles and elastic overlap each other by nigh ^ane⁄_ii inch (ane.three cm). Repeat this pace for the correct side of the beard.^[5]

   • Make sure that you are sewing the elastic to the back of the beard. If you are working with simulated fur, this is the fabric side, not the furry side.
   • The elastic needs to be long enough to hook around your ears. Yous may need to arrive longer or shorter depending on the size of your caput.
   • Alternatively, you can cut a single piece of rubberband and run up each end to each side of the beard. This fashion, you can pull the rubberband over the back of your head instead of your ears.

4. 4

   Cutting an identical beard out of matching felt. Notice a piece of felt that'south the same color as your beard. Ready your felt or false fur beard on superlative of the felt. Trace around the bristles with a marker, then gear up it aside. Cut the felt only inside the lines that y'all traced.^[half-dozen]

   • If y'all desire to brand a simple false fur bristles, you lot are done.^[vii]
   • You should exercise this step if you lot are making a simple felt bristles. A double-layer of felt will be much stronger than a single layer.

5. 5

   Pin and stitch the second piece of felt to the dorsum of the beard. Flip the bristles over then that you can see the back. Identify the felt beard on tiptop, roofing the elastic. Pin it in place, then sew around the edges using a whipstitch.^[8]

   • Alternatively, yous can mucilage the 2 pieces together using fabric mucilage.
   • If you used felt for both pieces, consider sewing around it on a sewing machine using a direct sew together and a 1/viii to i/4-inch (0.32 to 0.64-cm) seam allowance.^[nine]

Advertisement

1. 1

   Gear up the beard just before you lot demand to wear it. This beard is not reusable. Information technology is very realistic, however, making it platonic for costumes, cosplay, and theatrical productions. Requite yourself at least one-half an hour to prepare the bristles.

   • You can prepare the beard even before, merely it wouldn't exist a expert idea to prepare it the day earlier. It won't be comfortable to sleep in and it volition make a mess.

2. 2

   Unravel 12 inches (30 cm) of crepe wool. You tin can buy crepe wool in the doll-making section of some craft stores and fabric shops, but you may have ameliorate luck in a costume store or online. It is a long piece of wool roving (wool that hasn't been spun into yarn) that's woven into a braid-similar rope with cord.

   • To unravel crepe wool, but pull on the cord and gently unwind the wool.
   • for best results, choose a color that closely matches your own. If y'all can't find the right color, become a shade darker.

3. 3

   Untwist the crepe wool and cutting it to your desired length. Gently tug the wool apart to create a wide, thin sheet. Gently pull on the fibers to dissever a tuft that's close to the length you need. Concord the fibers against your mentum, and trim them if needed.

4. 4

   Utilise spirit gum under your chin and wait ane infinitesimal. Open up up a canteen of spirit gum. Apply the fastened brush to apply a thin layer of spirit mucilage to just under your chin, right where the bone is. Wait one minute for the spirit gum to become tacky.

   • Only apply a small-scale patch of spirit gum, about ¹⁄₂ inch (1.3 cm) wide and 1 to ii inches (2.5 to 5.1 cm) long.
   • You lot can find spirit gum in costume stores and online.

5. 5

   Printing the crepe wool into place. Discover the cutting ends of the fibers. Spread them out then that they can cover the area you coated with spirit gum. Gently press them confronting the spirit gum. Push the tuft into place with a forest cuticle pusher or the end of a makeup brush.

6. six

   Echo the procedure to apply more crepe wool. Apply some spirit gum to your jaw, so let it dry for one infinitesimal. Measure and cut the crepe wool, then press it into identify. Work your way along your jaw showtime, then work your way upward past your chin and jaw bone.

   • How far up your confront you apply the bristles is up to yous. You can even employ a little on your upper lip to create a mustache.
   • Wait at pictures of real beards to go an idea for style and shape.

7. 7

   Trim the beard to your desired length. Chances are, the beard may be uneven in some areas. Use scissors to trim the bristles into your desired shape. Once more, look at pictures online for ideas on how to cut your beard.

   • Exercise not use a beard trimmer or clipper, or the spirit gum will clog it up. Use pocket-sized trimming scissors.

8. 8

   Utilise translucent setting pulverisation over backlog spirit mucilage. This will help dry it out and prevent polish. For best results, utilize theatrical-course translucent setting powder and a big, fluffy, makeup brush. It comes in loose-powder grade rather than pressed-powder grade. You can find information technology in costume stores and online.

   • At this point, y'all tin finish the remainder of your makeup, including foundation, contouring, eyeshadow, etc.

9. 9

   Remove the bristles with spirit gum remover when you want to take it off. Dip a sponge-tipped makeup brush into spirit gum remover, so dab the height edge of your beard. Wait about 30 seconds for the spirit glue to dissolve, then pull the beard away. Repeat the process for the next layer of beard until you accept everything removed.^[10]

   • Wipe your chin and jaw (wherever you applied the spirit gum) subsequently with a cotton wool ball dipped in spirit gum remover to get rid of any residual.
   • You can purchase spirit gum remover online and in costume stores. It is usually sold aslope the spirit mucilage.

Advertising

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizement

• Match the bristles color to your ain. If you can't find the right colour, become a shade darker.

• Yous can find modest swatches of faux fur in the arts and crafts store, but a cloth store will take a bigger selection.

Cheers for submitting a tip for review!

Advertisement

Things You'll Need

• Felt
• Wool roving
• Scissors
• Sewing machine
• Hot glue, cloth glue, or tacky glue
• Sparse elastic

• Simulated fur and/or felt
• Thin elastic
• Sewing pins
• Pair of scissors
• Needle
• Thread

• Crepe wool
• Spirit gum
• Spirit glue remover
• Foam-tipped makeup brush
• Pair of scissors
• Powder castor
• Translucent setting powder

Well-nigh This Article

Article Summary X

To make a fake beard, showtime past getting some crepe wool and spirit gum from your local costume shop or online. Then, unravel about 12 inches of the crepe wool by pulling on the string and unwinding the wool. Next, tug the wool apart to create a wide, thin sheet, and pull the fibers to go the length y'all want. After that, apply a thin layer of spirit gum just under your mentum and expect a minute for it to get tacky before you press the wool into identify. Repeat the procedure to add additional layers of wool along your jaw and up by your chin. To larn how to use wool roving or faux fur to make your fake beard, keep reading!

Did this summary help you lot?

Thanks to all authors for creating a page that has been read 61,484 times.

Did this article assistance you?

Source: https://www.wikihow.com/Make-a-Fake-Beard

Posted by: ranasion1950.blogspot.com

Share this post